10th Anniversary Flagship

Limited edition, high performance charger

Ideal for freeriding and fall-line freestyle

Directional Freeride

Shape

Blunt Nose

Progressive Sidecut

Traction Tech 3.0

Tapered shape, 12.5mm

Flex

Stiffness: 8/10 - Precise

V-Core

Directional flex pattern

Limited edition of the Legend

Since it’s debut in 2010, the Jones Flagship has defined freeride performance. Purpose built to slash, stomp and straight line at top speed in any snow condition, the Flagship is without a doubt one of the most confidence inspiring shred sticks on the planet.

In celebration of this legendary freeride board’s 10th birthday, we are thrilled to debut a surprise ’10th Anniversary’ edition of the all-new 2020 Flagship! This special edition model levels up the 2020 Flagship’s look and performance. It shares the same shape, directional rocker profile and 3D Contour Base 3.0 as the standard 2020 Flagship, but it’s built with speed boosting, chatter sucking premium materials including a super damp Ash wood veneer topsheet, a blazing fast Ultra base and power packed Flax/Basalt stringers. The "dream range" graphic on both sides of the board’s waist was drawn by RP Roberts and features some of Jeremy Jones’ favorite mountains in the world.

The 10th anniversary Flagship will NOT be sold online. This limited edition model is only available at select brick and mortar Jones dealers.

Personality

Directional Rocker

A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls. — Jeremy Jones

Blunt Nose

How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. — Jeremy Jones

Progressive Sidecut

At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Traction Tech 3.0

Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.

Tapered shape, 12.5mm

The tapered shape sinks the tail in pow for better float and quicker turns.

Wend Natural Wax

Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Ultra Base

New Jones exclusive base material that sets new performance standards. Lab results and snow testing show 25% better wax absorption, better glide in warm/wet snow and better durability for grinding. We’ve also doubled the amount of wax and mixed multiple wax types for a faster factory wax in a wider range of conditions.

Biax Fiberglass

A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Factory Tuned

All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Recycled ABS Sidewalls

ABS Plastic is one of the necessary evils of snowboard production. We improve the sustainability of our snowboards by using only recycled plastic.

Oversized Recycled Edges

All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Sustainable Flax/Basalt Power Stringers

New Jones exclusive sustainable stringer made with 100% natural fibers. Composite Flax and Basalt stringers help transfer power to the edges, improves torsional response and absorbs board chatter.

Ash Veneer

Thin wood veneer layer that functions as both a protective topsheet and a global reinforcement layer. The thin wood stringers that make up the wood topsheet provide even flex and suck up chatter from uneven snow conditions.

Super Sap Bio Resin

All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Control Core

Dual-density full premium wood core featuring a 2:1 paulownia to poplar stringer ratio that keeps core light but ultra damp.

Gear 101
Not all board shapes are designed to be ridden the same size. Directional Freeride boards are the longest board you will ride.
Choose the ideal size Directional Freeride board using your weight and boot size (see the size chart below).

If you wear US Men’s 11.5 or bigger, look for our Big Horn series boards with minimum waist width 26.3 cm.
Not sure your ideal snowboard size? Check out our sizing guidelines for each model.

Know your board
The dimensions of a snowboard define how that board performs on snow. The dimension specs of all our models are fine tuned for specific styles of riding.
Understand how waist width, flex and sidecut and stance dimensions effect board performance to find the best board for you.

For reference: drawing of the Flagship 161

Size Chart

Product Size	Weight Range (lbs/kg)	Bindings Recommended Size	Weight / Production tolerance +/- 15%	Big Horn Series	Effective Edge Length	Nose Length (cm)	Tail Length (cm)	Nose Width (cm)	Waist Width (cm)	Tail Width (cm)	Taper	Sidecut (m)	Reference Stance (cm)	Centered Stance (cm)	Setback (cm)
158	130-180 lbs / 59-82 kg	S/M	2,7 kg / 5,9 lbs		117.6	32.7	18.7	29.4	24.9	28.1	1.2	8.5	60	58	2
161	140-190 lbs / 64-86 kg	S/M	2,8 kg / 6,1 lbs		120	33	19	29.57	25.2	28.34	1.2	9.1	60	58	2
162w	160-210 lbs / 73-95 kg	M/L	2,9 kg / 6,3 lbs	Big Horn Series	121	33	19	30.65	26.3	29.43	1.2	9.3	60	58	2

3D contour base 3.0

Freeride focused 3D-base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

Next level technology for ultimate response
Glide. Flow. Float.
3D Contour Bases are designed to make every run smoother and every turn more effortless by reducing the drag of the board tips. 3D Contour Bases enhance glide and improve float helping you ride faster and with better flow.

I’ve been on a quest to design a snowboard that offers the friction free glide and edge-to-edge fluidity of a surfboard for years. 3D Contour bases finally cracked the code on how to achieve this next level of board performance. Jeremy Jones

gallery

Find your limited edition Flagship

10th Anniversary Flagship retailers

Only sold in select retail locations worldwide. Not sold online.

The Dream Range

High Performance, Sustainably Made Gear
We design gear that balances performance, durability and sustainability. We strive to make equipment you can trust with the most eco-conscious materials possible. New for 2020, all our snowboards and splitboards are molded with Super Sap Bio-Resin.
Proud member of 1% For The Planet, we donate 1% of sales to fight climate change by supporting our non-profit partners Protect Our Winters and Community Carbon Trees.