Apollo

The ultimate freeride binding

Ideal for technical freeriding and high speed carving

Features

3-D Toe straps EVA combo

Tool-less adjuster straps

Nylon, recycled carbon post

Buckles 2.0

Hanger 2.0 Nylon reinforced with 30% fiberglass

Highcup compatibility

Flushcup technology

4x4 and EST disc included / 50%GF nylon

Weight: 897 grams

Lifetime Warranty (Baseplate)

Asym flax / carbon wide-back

Flex rating

The Apollo binding is designed for the expert freerider who demands unmatched edge control, response and comfort. What sets the Apollo apart is the Jones’ exclusive Flax/Carbon Highback that blends the ECO-performance of Flax with the lightweight, torsional stiffness of Carbon. Matching the premium highback with NOW Skate Tech technology created a binding that will respond to your every muscle twitch with lightning fast accuracy. The Apollo can be set up in Surf mode or Freeride mode by switching bushings and swapping the Flip-It ankle straps. Surf mode offers maximum tweak-ability, Freeride mode offers maximum response.

1. KINGPIN

Creates a fulcrum that magnifies edge to edge energy transfer through leverage.
Made from stainless steel with 4mm Allen key hardware.

2. HANGER

Creates a lever that pivots on Kingpin.
Transfer energy input from straps to bushings and onto board edges.
Baseless design allows for even board flex.
Made from Nylon reinforced with 30% fiberglass.
Hanger flex rating: 8

3. BUSHINGS

Main contact point to board.
Applies energy directly to edge and dampens board chatter.
Customizable dampening system.

4. POST

The connection between binding and board.
Bolts to board with 4x4 disc or Channel disc.
Attached to Hanger with Kingpin.
Made from Nylon and recycled Carbon.

Freeride mode vs Surf mode

Jones bindings offer customizable dampening and response by switching between Surf Mode and Freeride Mode. Surf Mode lets you tweak harder, while Freeride Mode keeps you locked in for maximum response. Switch modes by changing the bushings from soft (Surf Mode) to hard (Freeride Mode) and adjusting the Flip-It ankle straps. The Flip-It strap allows you to interchange the ankle straps between the left and right binding to create custom response. Ride with the ankle straps in Freeride mode for more lateral support and board response or flip the straps into Surf Mode for solid heel support, but more ankle flexibility for getting loose.

Flip-It Strap | SURF MODE

SURF MODE Position the wide half of the strap below the buckle for solid heel support but more ankle flexibility for getting loose. Use Soft Bushings for a looser, more dynamic surf feel.

Flip-It Strap | FREERIDE MODE

FREERIDE MODE Position the wide half of the strap above the buckle for more lateral support and board response. Use Hard Bushings for maximum board response.

Asym flax / carbon wide-back

Designed For Maximum High Back Response

The new Asym Flax / Carbon Wide Back is a composite high back featuring an extended width upper half for improved turn response. No more falling out of your highback on hard toe-side turns. The Wide Back keeps your boot top locked into your binding driving more power to your edges as you initiate a turn. The Wide Back is also pre-rotated five degrees to better follow your leg angles as you bend and pivot. The multi-position forward lean block offers rock solid support in any setting and the Flax /3K Carbon Fiber construction blends the ultralight stiffness of carbon with the superior sustainability of natural Flax fiber.

The Wide Back is the ultimate highback for freeriders that are serious about technical turn performance.