Mountain Twin

Freestyle Meets Freeride
Ideal for Slashing, Jibbing and Jumping
Directional All-Mountain
- Traction Tech
- Blunt Nose
- Progressive Sidecut
- Directional Twin
- Stiffness: 7/10 - Playful
- V-Core
- Twin flex pattern


The Mountain Twin is our time tested directional twin designed for playful shredders who want one board that can ride-it-all. The Mountain Twin is built to shred the whole mountain like it’s an endless skatepark without sacrificing float in pow or stability for bombing lines. Featuring blunted tips, a mid-stiff twin flex and a CamRock profile, the Mountain Twin excels at poppin’ pillows and pressin’ boxes while it’s also an easy board to turn and finesse in tight terrain. Camber underfoot combined with Traction Tech 2.0 give the board snap and hold carving hard pack or boosting out of the halfpipe while the Mountain Twin’s Mountain Core is specially profiled for unmatched torsional response between the feet.




Traction Tech

Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Traction Tech is a critical feature for rockered boards. Rocker improves glide in mixed conditions, but the decreased edge contact makes it harder to really lock
into your turns and hold a solid edge. Traction Tech is crucial to offset the edge drift of rocker. — Jeremy Jones

Blunt Nose
How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. — Jeremy Jones
Progressive Sidecut
At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.
Directional Twin
Flip Flop Base
Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.
Sintered 7000
Durable natural base material with added carbon for speed and good wax absorbency.
Wend Natural Wax
Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.
Triax Fiberglass
Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any ­terrain or snow conditions.
Factory Tuned
All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.
Recycled ABS Sidewalls
ABS Plastic is one of the necessary evils of snowboard production. We improve the sustainability of our snowboards by using only recycled plastic.
Oversized Recycled Edges
All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.
Eco Plastic Topsheet
Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet)
Super Sap Bio Resin
All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.
Mountain Core
Dual-density full wood core with hardwood bamboo stringers for added pop and durability.
Gear 101
Twin boards can be ridden shorter than a Directional Freeride board, unless you plan to ride the Twin in deep pow.
For steeps and park riding, size your Twin 2 - 3 cm shorter than your Directional Freeride board.
Choose the ideal size Directional Twin board using your weight and boot size (see the size chart below).
If you wear US Men’s 11.5 or bigger, look for our Big Horn series boards with minimum waist width 26.3 cm.
Not sure your ideal snowboard size? Check out our sizing guidelines for each model.

Know your board
The dimensions of a snowboard define how that board performs on snow. The dimension specs of all our models are fine tuned for specific styles of riding.
Understand how waist width, flex and sidecut and stance dimensions effect board performance to find the best board for you.
For reference: drawing of the Flagship 161

Size Chart
Product Size Weight Range (lbs/kg) Bindings Recommended Size Weight / Production tolerance +/- 15% Big Horn Series Effective Edge Length Nose Length (cm) Tail Length (cm) Nose Width (cm) Waist Width (cm) Tail Width (cm) Taper Sidecut (m) Reference Stance (cm) Centered Stance (cm) Setback (cm)
151 110-160 lbs / 49-73 kg S/M 2,6 kg / 5,7 lbs 112 20.5 20.5 28.78 24.8 28.78 0 7.4 54 52 2
154 120-170 lbs / 54-77 kg S/M 2,7 kg / 5,9 lbs 114.6 20.7 20.7 29.06 25 29.06 0 7.6 56 54 2
155w 130-180 lbs / 59-82 kg M/L 2,7 kg / 5,9 lbs 115 21 21 29.83 25.8 29.83 0 7.695 58 56 2
157 130-180 lbs / 59-82 kg S/M 2,7 kg / 5,9 lbs 117 21 21 29.42 25.3 29.42 0 7.8 60 58 2
158w 140-190 lbs / 64-86 kg M/L 2,7 kg / 5,9 lbs 118 21 21 29.94 25.8 29.94 0 7.9 60 58 2
160 150-200 lbs / 67-91 kg M/L 2,7 kg / 5,9 lbs 119.4 21.3 21.3 29.8 25.6 29.8 0 8 60 58 2
161w 150-200 lbs / 67-91 kg M/L 2,8 kg / 6,1 lbs 120.6 21.2 21.2 30.18 26 30.18 0 8.2 60 58 2
162 160-210 lbs / 73-95 kg M/L 2,8 kg / 6,1 lbs 121.4 21.3 21.3 29.84 25.6 29.84 0 8.195 60 58 2
164w 170-220+ lbs / 77-100+ kg M/L 2,9 kg / 6,3 lbs 123.2 21.4 21.4 30.47 26.2 30.47 0 8.4 60 58 2
167w 170-220+ lbs / 77-100+ kg M/L 3,0 kg / 6,6 lbs Big Horn Series 125.6 21.2 21.2 31.03 26.8 31.03 0 8.8 60 58 2

High Performance, Sustainably Made Gear
We design gear that balances performance, durability and sustainability. We strive to make equipment you can trust with the most eco-conscious materials possible. New for 2020, all our snowboards and splitboards are molded with Super Sap Bio-Resin.
Proud member of 1% For The Planet, we donate 1% of sales to fight climate change by supporting our non-profit partners Protect Our Winters and Community Carbon Trees.